Harden X SI™
Lithium Hardener / Sealer / Densifier / Salt Inhibitor
Exterior/Interior Use on New or Exisiting Concrete
Harden X SI™ provides superior concrete strength and protection against dusting, moisture, abrasion, bacteria, chemical attack, and the general wear and tear sustained by both interior and exterior surfaces over time.
Harden X SI™ is not a coating–it completely penetrates the surface to become part of the structure in just one application—with no cracking, peeling or flaking for the life of the surface.
Superior Salt Protection.
Independent tests show that the chloride screens formed by the lithium technology in Harden X SI™ reduce salt absorption by 91%.
Stable in all environmental conditions.
The insolubility of the lithium in Harden X SI™ provides superior water resistance over sodium silicates which absorb moisture and cause the ASR that produces cracking and crazing after repeated expansion/contraction cycles.
Maximun Resistance.
Harden X SI™ reduces surface porosity for maximum resistance to dusting, moisture, and chemical attack. Mohs hardness testing shows a 38% increase in abrasion resistance. Harden X SI™ also reduces the potential for efflorescence.
Easy, Fast-Drying, One-Time Application.
Harden X SI™ is simply sprayed evenly over the surface with no flushing or removal/disposal of any excess material and is dry in 10 minutes (open to traffic in 30). One application protects for the life of the concrete, leaving a light-reflective surface that is easy to maintain with minimal downtime and maintenance expense.
Environmental Advantages.
-
LEED Certified- Meets EQ Credit 4.1: Low Emitting Materials/Adhesives and Sealants
-
No VOCs
-
Water-based
-
Odorless
-
Eliminates dusting of concrete for improved air quality
-
Leaves no residue in groundwater or wastewater
-
Concentrated material- lower application rate, fewer containers, reduced shipping costs
Address
4/31 Fiveways Boulevard
Keysborough, Melbourne
Australia
3173
+61 3 8795 4969